Please complete the form below and your local Jim’s Detailer will be in touch with you as soon as possible to book a suitable time.
Pet hair and heavy soiling may incur surcharges.
What is Cut and Polishing?
With many years of experience in the car detailing industry, Jim’s Car Detailing franchisees have mastered the art of cut and polish to give your vehicle the shine it deserves. The ultimate shine requires polishing in some form to your paint. No wax in the world will improve the appearance of a paint surface as well as cut and polishing.
Cut and Polish is a process where an extremely fine layer of clear coat is removed using specific cutting and polishing compounds. This flattens the surface of your vehicle’s paint work, permanently removing fine swirls and scratches in your clear coat which appear when looking at your paint in direct sunlight. These scratches are most visible on darker coloured cars.
A vehicle paint that is cut and polished by the experts in Jim’s will result in high levels of shine and gloss. Your vehicles paint is prepared for cut and polish through a thorough hand wash with our biodegradable pH neutral shampoo followed by a clay bar treatment to remove oxidation, industrial fallout, rail dust and brake dust. It is then buffed with the highest quality cutting compounds to remove swirls and light scratches.
Cut and polish process on most paint surfaces require at least a two-step process. The defect-removing step followed by a finishing step. Many Japanese and Australian made vehicles have soft clear coats, which make them easier to remove defects, requiring less aggressive methods to perfect.
Many European car manufacturers in recent years have started adding ceramic particles into their clear coats to make them scratch-resistant. These ceramic clear coats require the best compounds on the market to effectively correct these extremely hard surfaces. Luckily Jim’s Car Detailing professionals have the right compounds and polishes for these kinds of vehicles.
Most car detailing shops or mobile detailers in Australia do not use the right products to cut and polish your vehicle or don’t have enough experience in the field. They will go ahead and use an aggressive cutting compound (a liquid designed to flatten clear coat quickly) and an aggressive wool pad at dangerously high speeds on a very powerful rotary buffer/polisher, which can easily remove the clear coat and burn the paint of your vehicle in seconds in the wrong hands. Machine buffing requires experience and patience, or high levels of damage can easily occur.
When cut and polishing, it is extremely important to use the right compounds and polishes with the right pads and machines along with the right technique to achieve the perfect finish. Misuse of even a single one of them can cause irreversible damage to your vehicle resulting in a respray job. It is vital to apply that perfect pressure on the cutting machine to give the pad that perfect heat. Experts at Jim’s Car Detailing have many years of experience in the field so rest assured that we will give your vehicle the love it needs.
Unfortunately most car detailers skip the crucial refining steps of cut and polish which results in an uneven surface, leaving new set of swirls in the paint. Instead, after the compounding steps on the rotary buffer at dangerously high speeds, the detailing shop will “glaze” the paint. A glaze is an oil-rich liquid that will temporarily hide and fill-in most of the defects in your paint or clear coat, especially swirls and fine scratches. After a few rain showers, the glaze will rinse away, resulting in a paint surface that looks worse than what it was prior to cut and polishing. We don’t use fillers to fill in the scratches – we remove them!
Yes, even new cars that are close to 100% defect free can benefit from a very fine polishing of the paint surface. After prepping the paint for cut and polish, a fine machine polish will burnish the paint like a diamond to microscopically refine the surface to an extreme flatness, resulting in the most optical clarity and reflectivity. Polishing the paint with a fine polish will significantly improve the gloss and wet-look of a painted surface, and that’s before any wax has been applied to the paint surface! For the fanatical car enthusiast, performing the ultra-fine polishing step multiple times will result in finish that is truly show worthy. With each and every pass of our ultra-fine polishing process, the finish will get wetter, and the reflections will get deeper.
Can we guarantee to remove all scratches?
No, and neither can anyone else .. BUT we are committed to doing the best possible job that we can and to ensuring that when we finish your vehicle will look all it can be. So if you want a nice shiny car again, then call the Jim’s Mobile Car Detailing experts. We will come to you wherever you are in Melbourne, and we guarantee that this is one decision you won’t regret.